Amprobe ACDC-100 Specifikace

ACDC-100 TRMS ACDC-100Versatile AC/DC Clamp-on Multimeter SeriesUsers Manual99 Washington Street Melrose, MA 02176 Phone 781-665-1400Toll Free 1-800-5

9Turn off power to the circuit being measured. 3. Free at least one end of the diode from the circuit. 4. Connect the test probes across the diode not

10SPECIFICATIONSGeneral SpecificationsDisplay: 3-3/4 digits 4000 counts LCD displayUpdate Rate: 3 per second nominalPolarity: AutomaticPower Supp

11Electrical (23 °C ± 5 °C) < 75% RHDC VoltageRANGE Accuracy400.0 mV ± (0.3% + 3dgts)4.000V, 40.00V, 400.0V ± (0.5% + 3dgts)600V ± (1.0% + 4dgts)R

12CapacitanceRANGE 1)Accuracy 2) 3)500.0 nf, 5.000 µf, 50.00 µf, 500.0 µf, 3000 µf ± (3.5% + 6dgts)Resolution: 0.1 nf on 500.0 nf range1) Additional 5

13 Figure 1. — DC Voltage and AC Voltage functions

14 Figure 2. — ACA & DCA Current clamp-on function

15 Figure 3. — Resistance, Continuity, Capacitance and Diode functionsFigure 4. — Battery replacement

1EnglishACDC-100 TRMS ACDC-100Versatile AC/DC Clamp-on Multimeter SeriesUsers ManualACDC100_Rev002© 2010 Amprobe Test Tools.All rights reserved.

2Limited Warranty and Limitation of LiabilityYour Amprobe product will be free from defects in material and workmanship for 1 year from the date of pu

3 ➊ Hall-effect Clamp Jaw for AC & DC current electric field pick up ➋ Hand/Finger Barrier to indicate the limits of safe access of the meter durin

4ACDC-100 TRMS / ACDC-100 Versatile AC/DC Clamp-on Multimeter SeriesCONTENTSSymbols ...

5SYMBOLSBatteryRefer to the manualDouble insulatedDangerous VoltageDirect CurrentEarth GroundAlternating CurrentAudible toneConforms to relev

6Before and after hazardous voltage measurements, test the voltage function on a known •source such as line voltage to determine proper meter functio

7HOLD Press the HOLD button momentarily toggles to hold mode for all of the functions. To release the HOLD feature momentarily press the HOLD button.

8AC Current (see Fig. 2) Set the Function Switch to A1. position. Select AC current using the SELECT button. 2. Open spring-loaded clamp by pressin